|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
ALUMINUM ELECTROLYTIC CAPACITORS WF Item Chip Type, Low Impedance series Chip type, low impedance temperature range up to +105C. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine using carrier tape. Adapted to the RoHS directive (2002/95/EC). WG Low Impedance Specifications Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan WF Low Impedance WT Performance Characteristics - 55 ~ +105C 6.3 ~ 35V 1 ~ 220F 20% at 120Hz, 20C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (A) , whichever is greater. Measurement frequency : 120Hz, Rated voltage (V) tan ( MAX.) Temperature : 20C 6.3 0.22 10 0.19 6.3 2 4 16 0.16 10 2 4 16 2 3 25 0.14 25 2 3 35 0.12 35 2 3 Within 20% of initial value 200% or less of initial specified value Initial specified value or less Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z- 25C / Z+20C Impedance ratio Z- 55C / Z+20C ZT / Z20 (MAX.) Endurance After 1000 hours' application of rated voltage at 105C, capacitors meet the characteristic requirements listed at right. Capacitance change tan Leakage current Shelf Life Resistance to soldering heat Marking After storing the capacitors under no load at 105C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they will meet the specified value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250C, Within 10% of initial value Capacitance change for 30 seconds. After removing from the hot plate and restored tan Initial specified value or less at room temperature, they meet the characteristic requirements listed Leakage current Initial specified value or less at right. Black print on the case top. Chip Type (4 ~ 6.3) 105C Marking Capacitance Lot No. 0.5 MAX. Plastic platform Voltage D0.5 0.3 MAX. C0.2 Positive Type numbering system (Example : 16V 10F) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 UWF 1 C 1 0 0 MC L 1 G B A0.2 A0.2 D 4 ~ 6.3 8 Code GB GS B0.2 X2P 10 16V E Taping code Configuration Capacitance tolerance (20%) Rated Capacitance (10F) (mm) D 5.4 +0.1 -0.2 (8) 105C Marking Capacitance Trade mark Plastic platform 0.3 MAX. Voltage D0.5 0.5 ~ 0.8 Negative Positive 0.5 MAX. 4 1.8 4.3 4.3 1.0 5 2.1 5.3 5.3 1.3 6.3 2.4 6.6 6.6 2.2 8 3.3 8.3 8.3 2.3 Rated voltage (16V) Series name Type C0.2 A B A0.2 A0.2 C E B+ 0.2 - X2P 100 16V Lot No. 6.20.3 E Dimensions V Cap. (F) Code 0.5 ~ 0.8 Negative Voltage mark for 6.3V is 6V. 6.3 0J 10 1A 16 1C 25 1E 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 010 1R5 2R2 3R3 4R7 6R8 100 150 220 330 470 680 101 151 221 4 5 5 6.3 6.3 8 8 5.0 2.6 2.6 1.3 1.3 0.8 0.8 50 80 80 115 115 150 150 5 5 6.3 6.3 8 8 2.6 2.6 1.3 1.3 0.8 0.8 80 80 115 115 150 150 4 5 5 6.3 6.3 8 8 5.0 2.6 2.6 1.3 1.3 0.8 0.8 50 80 80 115 115 150 150 4 4 5 6.3 6.3 6.3 8 8 5.0 5.0 2.6 1.3 1.3 1.3 0.8 0.8 50 50 80 115 115 115 150 150 4 4 4 4 4 5 5 6.3 6.3 8 8 35 1V 5.0 5.0 5.0 5.0 5.0 2.6 2.6 1.3 1.3 0.8 0.8 50 50 50 50 50 80 80 115 115 150 150 Case size D (mm) Impedance Rated ripple Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.35 120 Hz 0.50 300 Hz 0.64 1 kHz 0.83 10 kHz~ 1.00 Max. Impedance () at 20C 100kHz Rated Ripple (mArms) at 105C 100kHz Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please select UJ(p.76) series if high C/V products are reqired. Please refer to page 3 for the minimum order quantity. CAT.8100V |
Price & Availability of UWF1E220MCL |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |